COMPATIBLE WITH COLOR SCREEN AND OR NAVIGATION VEHICLES.

COMPATIBLE WITH 6.5/8.8/10 INCH SCREENS

Description:

NavTool NAVTOOL3.0 is a new generation of navigation video interfaces that adds smartphone mirroring and video capabilities to vehicles with factory installed navigation system, or with a color information screen.

• ADD UPTO 4 CAMERAS
• FRONT CAMERA
• LEFT LANE WATCH CAMERA
• RIGHT LANE WATCH CAMERA
• REAR VIEW CAMERA - IF VEHICLE IS NOT EQUIPPED WITH FACTORY REAR VIEW CAMERA

NavTool NAVTOOL3.0 adds 4 composite video inputs to your factory navigation screen or color information screen.

NavTool NAVTOOL3.0 does not replace or add a factory navigation system; it creates additional video inputs and smartphone mirroring capabilities for the factory installed navigation system or color information screen. Vehicles equipped with factory color screen or an outdated factory navigation can now take advantage of the navigations apps installed on your smartphone, mirror/project any application including navigation applications (Waze, Google Maps and similar) from your smartphone to your vehicle's color screen.

If a vehicle is not equipped with the factory navigation system, we offer an add-on navigation system.
NAVIGATION GPS SYSTEM ADD-ON

Details:

NavTool NAVTOOL3.0 + BMW are 100% plug and play - no wire cutting required. NavTool plug and play installation harnesses are made using O.E.M. BMW connectors.
(Accessory, Ground, Reverse, Parking Brake wires may still need to be connected)

NavTool NAVTOOL3.0 is an externally wired plug and play video interface that is installed in-line with the navigation computer and navigation screen. It works simply by interrupting the video signal from the navigation computer when it is activated, or when +12V are applied on the reverse camera wire. When this occur the navigation system video image will be replaced by the video source connected to NavTool NavRGB 3.0 video interface.

NavTool NAVTOOL3.0 video sources connected to NavTool interface via HDMI also receive audio via HDMI, then from NavTool audio output connect to vehicles AUX audio input..  

NavTool NAVTOOL3.0 is video-in-motion enabled for off-road (away from any public roads) use, the video image will stay on the screen even while the vehicle is in motion, however, we do not recommend doing this.

Factory navigation DVD-ROM cannot play DVD movies, an external video source is needed to display video on the factory navigation screen. Examples of the video sources: DVD player, Game Console, Digital Media Player, HDD, iPhone, iPad, iPod Video (NavTool NAVSGF 3.0-HDMI does not allow control from the vehicle's touch screen, all touch screen controls remain from the smartphone, however, smartphone screen will be mirrored/duplicated on your vehicle's color and/or navigation screen).

If a vehicle is not equipped with the factory navigation system, we offer an add-on navigation system.
NAVIGATION GPS SYSTEM ADD-ON

Controls & Inputs:

Micro USB Connector is dedicated for future software updates.
CLICK HERE FOR THE MICRO USB UPDATE CABLE - NOT REQUIRED IF YOU ALREADY OWN ONE, IT IS A REGULAR (USB A TO USB MICRO B) CABLE

VIDEO INPUTS AS MULTIPLE CAMERA SWITCHING

Front Camera Input: is dedicated to an installation of a front camera. The front camera can be turned on automatically after the reverse and will stay on the screen up to 10 MPH, or can be turned on manually at any time.
CLICK HERE FOR THE LIST OF AN AVAILABLE FRONT CAMERAS

Left Camera Input: is dedicated to an installation of a left lane watch camera. The left camera can be turned on automatically with a left turn signal or can be turned on manually at any time.
CLICK HERE FOR THE LIST OF AN AVAILABLE LANE WATCH CAMERAS

Right Camera Input: is dedicated to an installation of a right lane watch camera. Right camera can be turned on automatically with a right turn signal or can be turned on manually at any time.
CLICK HERE FOR THE LIST OF AN AVAILABLE LANE WATCH CAMERAS

Rear Camera Input: (if a vehicle is not equipped with a factory rear view camera) is dedicated to an installation of a rear view camera. Rear view camera can be turned on automatically in reverse or can be turned on manually at any time.
CLICK HERE FOR THE LIST OF AN AVAILABLE REAR VIEW CAMERAS

Any of The Above Video Inputs can also be used as an input for a 360 surround view cameras
CLICK HERE FOR THE LIST OF AN AVAILABLE SURROUND VIEW CAMERAS

Video switching is done via factory radio buttons, all factory features continue to operate as before. 

If preferred video switching can be done by push button switch, the single push will cycle between video inputs, press and hold push button for more than 2 seconds to return back to the original navigation/information screen.
CLICK HERE FOR THE LIST OF AN AVAILABLE PUSH BUTTONS

Installation:

THIS INTERFACE SHOULD BE CONNECTED AT THE SCREEN CONTROLLER AND NOT BEHIND THE SCREEN.

Simply unplug factory connector from the back of the screen controller, plug in a male connector of supplied BMWX plug and play harness into navigation computer/screen controller, and plug in factory connector into the female connector of supplied BMW plug and play harness. The installation is really that simple.

NavTool NAVTOOL3.0+BMW is plug and play video interface and only requires extra wiring for +12V accessory power input and chassis ground connection, this connection will not void your vehicles factory warranty.

Why installing NavTool interface has no effect on vehicle warranty?


Vehicles owners are often confused about the effect on their warranty if aftermarket parts installed on their brand new vehicles. This confusion often is the result of intentionally misleading information intended to convince you that only the manufacturer or authorized dealer should service your vehicle. 
 
This practice is also known as "Tie-In Sales" Provisions. Legally tie-in sales provisions are not allowed. These provisions require an owner of the warranted product to buy an item or service from a particular company to use with the warranted product in order to be eligible to receive a remedy under the warranty. For example, in order to keep your new vehicles warranty in effect, you must use genuine parts. Failure to have scheduled maintenance performed, at your expense, by the dealership voids this warranty.
 
Click here for more information.

Contents of the Package:

NavTool Video Interface:
Part#: NAVTOOL3.0

NavTool plug and play Installation Harness:
Part#: BMW 

Need Accessories?
NAVTOOL3.0 ACCESSORIES

Disclaimer:

DISCLAIMER: PLEASE READ CAREFULLY
NavTool video interface DOES NOT REPLACE NAVIGATION SYSTEM, it gives you the ability to add external a/v sources. NavTool is designed to be used only when the vehicle is immobilized. The driver is responsible for maintaining full attention while operating a motor vehicle. The removal or bypassing of safety features in NavTool products will result in termination of warranty. Using NavTool unit improperly may result in injury, citation or arrest by authorities. Therefore NavTool inc. owners and employees are not responsible for unauthorized use. It is highly recommended that a professional mobile electronics installer will perform the installation of NavTool products.