COMPATIBLE WITH COLOR SCREEN AND OR NAVIGATION VEHICLES.

Description:

NavTool GMBOX3.0 is a new generation of navigation video interfaces that adds video and unlock capabilities to vehicles with factory installed navigation system, or with a color information screen.

if the vehicle is not equipped with factory rear view camera please use this interface:
NAVIGATION VIDEO INTERFACE with BUILT-IN HD SMARTPHONE MIRRORING via HDMI

AVAILABLE CAMERA FEATURES 

• Add up to 3 cameras - vehicles must be equipped with factory rear view camera.
• Front Camera.
• Left Lane Watch Camera.
• Right Lane Watch Camera.

• Factory Camera In-Drive - Vehicle must be equipped with a factory camera.
• Unlock Video-In-Motion - Vehicle must be equipped with a factory AUX video input or factory DVD player.
• Unlock DVD-In-Motion - Vehicle must be equipped with a factory DVD player.
• Unlock Navigation-In-Motion - Vehicle must be equipped with a Navigation system.
• Unlock Control-In-Motion - Unlock certain features that are locked while driving.

NavTool GMBOX3.0 adds 3 composite video inputs to your factory navigation or color information screen.

NavTool GMBOX3.0 does not replace or add a factory navigation system; it creates additional video input capabilities for the factory installed navigation or color information screen. 

If the vehicle is not equipped with a factory rear view camera please use this interface: 
NAVIGATION VIDEO INTERFACE with BUILT-IN HD SMARTPHONE MIRRORING via HDMI

If the vehicle is not equipped with a factory navigation system please see our add-on navigation module: 
NAVIGATION GPS SYSTEM ADD-ON

Details:

NavTool GMBOX3.0 + GMQUAD1 are 100% plug and play - no wire cutting required. NavTool plug and play installation harnesses are made using O.E.M. GM/BUICK connectors.

NavTool GMBOX3.0 is an externally wired plug and play interface that is installed behind the factory radio. It simply unlocks features that are locked during driving, it's 100% seamless and there is no change to your factory setup or operation.

NavTool GMBOX3.0 is a video-only input interface and does not have any audio inputs. If the vehicle does not have a factory installed AUX audio jack, then an auxiliary audio input adapter or an audio FM modulator is needed to connect audio signals from an external Audio/Video source to the factory audio system. The video and audio will always be perfectly in sync.

NavTool GMBOX3.0 is video-in-motion enabled for off-road (away from any public roads) use, the video image will stay on the screen even while the vehicle is in motion, however, we do not recommend doing this.

If the vehicle is not equipped with a factory DVD player, an external video source is needed to display video on the factory screen. Examples of the video sources: DVD player, Game Console, Digital Media Player, HDD, iPhone, iPad, iPod Video.

If the vehicle is not equipped with a factory rear view camera please use this interface: 
NAVIGATION VIDEO INTERFACE with BUILT-IN HD SMARTPHONE MIRRORING via HDMI

If the vehicle is not equipped with a factory navigation system please see our add-on navigation module: 
NAVIGATION GPS SYSTEM ADD-ON

Controls & Inputs:

Micro USB Connector is dedicated for future software updates.
CLICK HERE FOR THE MICRO USB UPDATE CABLE - NOT REQUIRED IF YOU ALREADY OWN ONE, IT IS A REGULAR (USB A TO USB MICRO B ) CABLE

VIDEO INPUTS AS MULTIPLE CAMERA SWITCHING - If the vehicle is not equipped with factory rear view camera please use this interface: 
NAVIGATION VIDEO INTERFACE with BUILT-IN HD SMARTPHONE MIRRORING via HDMI

Front Camera Input: is dedicated to an installation of a front camera. The front camera can be turned on automatically after the reverse and will stay on the screen up to 10 MPH, or can be turned on manually at any time.
CLICK HERE FOR THE LIST OF AN AVAILABLE FRONT CAMERAS

Left Camera Input: is dedicated to an installation of a left lane watch camera. The left camera can be turned on automatically with a left turn signal or can be turned on manually at any time.
CLICK HERE FOR THE LIST OF AN AVAILABLE LANE WATCH CAMERAS

Right Camera Input: is dedicated to an installation of a right lane watch camera. Right camera can be turned on automatically with a right turn signal or can be turned on manually at any time.
CLICK HERE FOR THE LIST OF AN AVAILABLE LANE WATCH CAMERAS

Any of The Above Video Inputs can also be used as an input for a 360 surround view cameras
CLICK HERE FOR THE LIST OF AN AVAILABLE SURROUND VIEW CAMERAS

Video Switching - is controlled via factory radio buttons, all factory features continue to operate as before. 

Video Unlock - is controlled via factory radio buttons, all factory features continue to operate as before.

Unlock Video-In-Motion - Vehicle must be equipped with a factory AUX video input or factory DVD player.

Unlock DVD-In-Motion - Vehicle must be equipped with a factory DVD player.

Unlock Navigation-In-Motion - Vehicle must be equipped with a navigation system.

Unlock Control-In-Motion - Unlock certain features that are locked while driving.

Factory Camera In-Drive - Vehicle must be equipped with a factory camera.

Installation:

THIS INTERFACE SHOULD BE CONNECTED AT THE NAVIGATION COMPUTER/SCREEN CONTROLLER AND NOT BEHIND THE SCREEN.

Simply unplug factory connector from the back of the navigation computer/screen controller, plug in a male connector of the supplied GMQUAD1 plug and play harness into the navigation computer/screen controller, and plug in factory connector into the female connector of the supplied GMQUAD1 plug and play harness. The installation is really that simple.

Why installing NavTool interface has no effect on vehicle warranty?


Vehicles owners are often confused about the effect on their warranty if aftermarket parts installed on their brand new vehicles. This confusion often is the result of intentionally misleading information intended to convince you that only the manufacturer or authorized dealer should service your vehicle. 
 
This practice is also known as "Tie-In Sales" Provisions. Legally tie-in sales provisions are not allowed. These provisions require an owner of the warranted product to buy an item or service from a particular company to use with the warranted product in order to be eligible to receive a remedy under the warranty. For example, in order to keep your new vehicles warranty in effect, you must use genuine parts. Failure to have scheduled maintenance performed, at your expense, by the dealership voids this warranty.
 
Click here for more information.

Contents of the Package:

NavTool Video Interface:
Part#: GMBOX3.0

NavTool plug and play Installation Harness:
Part#: GMQUAD1

Need Accessories?
NavTool3.0-HDMI ACCESSORIES

Disclaimer:

DISCLAIMER: PLEASE READ CAREFULLY
NavTool video interface DOES NOT REPLACE NAVIGATION SYSTEM, it gives you the ability to add external a/v sources. NavTool is designed to be used only when the vehicle is immobilized. The driver is responsible for maintaining full attention while operating a motor vehicle. The removal or bypassing of safety features in NavTool products will result in termination of warranty. Using NavTool unit improperly may result in injury, citation or arrest by authorities. Therefore NavTool inc. owners and employees are not responsible for unauthorized use. It is highly recommended that a professional mobile electronics installer will perform the installation of NavTool products.